View CLL801-0101A7-50CM1A2_6280982.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

and are trademarks or registered trademarks of citizen holdings co., ltd. japan. is a trademark or a registered trademark of citizen electronics co., ltd. japan. data sheet CLL801-0101A7-50CM1A2 ref.ce-p2013 05/12
1/13 1. scope of application these specifications are applied to the ch ip type led lamp , model CLL801-0101A7-50CM1A2 2. part code CLL801-0101A7-50CM1A2 [1]series cll : led for g eneral li g htin g [2]outline dimensions 801 : 1.6(l) x 0.8(w) x 0.9(h) [3]dies in series q uantit y 01 : 1 [4]dies in p arallel q uantit y 01 : 1 [5]correlated color tem p erature 50 : 5000 k [6]chromaticit y ran g e c : low watt ce chromaticit y ran g e [7]cri m1 : ra min 80 ?@ t yp e s y mbol citiled CLL801-0101A7-50CM1A2 citizen electronics co.,ltd. japan name data sheet [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] [ 7 ] ref.ce-p2013 05/12
2/13 3. outline drawin g 4. performance ( 1 ) absolute maximum rating unit power dissipation mw forward current ma forward pulse current ma *1 reverse voltage v operating temperature c storage temperature c junction temperature c*2 *1 forward current : duty<=1/10 , pulse width<=10msec *2 d.c. current : tj = tc + rj-c p d pulse current : tj = tc + rj-c pw(power dissipation / one-pulse) duty ?@?@ *ts : solder terminal(cathode)temperature s y mbol citizen electronics co.,ltd. japan data sheet 30 40 parameter 120 t op t st tj max CLL801-0101A7-50CM1A2 citiled name v r -30 ?` +85 raiting value 105 symbol p d i f i fp 5 -40 ?` +100 unit ?fmm tolerance ?f?}0.1mm ref.ce-p2013 05/12
3/13 ( 2 ) electro-optical characteristics t ?? =25c symbol min. typ. max. unit v f 2.9 3.2 3.5 v i r --100a r j -s *1 -150 - c/w v 5.3 6.7 8.0 lm ra 80 85 - - *1 thermal resistance : junction - solder terminal (cathode) *1 the tolerance of measurement at our tester is vf3% , v7% , chromaticity(x,y)0.01 *for an order, products within th e rank listed above will be delivered. except designation of a delivery proportion of each rank. s y mbol forward voltage reverse current thermal resistance luminous flux parameter condition data sheet citizen electronics co.,ltd. japan junction-solder i f =20ma general color rendering index name citiled i f =20ma i f =20ma v r =5 v CLL801-0101A7-50CM1A2 r an ki ng (c on di t i on : i f =20m a , t s=25 c) 00 symbol rank min. max. unit q 2.9 3.1 r 3.1 3.3 s 3.3 3.5 c 5.3 6.7 ?c 6.7 8.0 ch romat i c i ty coor di nates ( c on di t i on : i f =20m a , t s=25 c) xy xy 0.3430 0.3661 0.3551 0.3760 0.3310 0.3562 0.3430 0.3661 0.3310 0.3391 0.3417 0.3475 0.3417 0.3475 0.3524 0.3559 0.3430 0.3661 0.3551 0.3760 xy xy 0.3417 0.3475 0.3524 0.3559 0.3310 0.3391 0.3417 0.3475 0.3310 0.3220 0.3404 0.3289 0.3404 0.3289 0.3498 0.3357 v f v luminous flux v 2 1 color rank color rank 4 3 color rank color rank parameter forward voltage lm ref.ce-p2013 05/12
4/13 s y mbol data sheet citiled name CLL801-0101A7-50CM1A2 citizen electronics co.,ltd. japan 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.32 0.33 0.34 0.35 0.36 x y x, y chromaticity 2 1 3 4 ref.ce-p2013 05/12
5/13 5. characteristics ?e forward current vs. forward voltage ?e forward current vs. relative luminous intensity ?e forward current vs. chromaticity coordinate ?e solder temperature vs. chromaticity coordinate ?e solder temperature vs. forward voltage ?e solder temperature vs. relative luminous intensity s y mbol citizen electronics co.,ltd. japan name CLL801-0101A7-50CM1A2 data sheet citiled -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 5 10 15 20 25 30 35 i f [ma] ?? x, ?? y ?? x ?? y ts=25c 0% 20% 40% 60% 80% 100% 120% 140% 160% 0 5 10 15 20 25 30 35 i f [ma] relative luminous intensity [a.u.] ts=25c 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 0 5 10 15 20 25 30 35 i f [ma] v f [v] ts=25c -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 20406080100 ts [c] ?? x, ?? y ?? x ?? y i f =20ma 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 0 20406080100 ts [c] v f [v] i f =20ma 0% 20% 40% 60% 80% 100% 120% 020406080100 ts [c] relative luminous intensity [a.u.] i f =20ma ref.ce-p2013 05/12
6/13 ?e solder temperature vs. allowable forward current ?e spectrum ?e directive characteristic led chip is mounted on white color pcb. s y mbol data sheet citiled name citizen electronics co.,ltd. japan CLL801-0101A7-50CM1A2 0% 20% 40% 60% 80% 100% 120% 350 450 550 650 750 850 [nm] relative emission intensity [a.u.] i f =20ma, ts=25c 0 5 10 15 20 25 30 35 0255075100125 ts [c] i f [ ?? a] i f =20ma ?@ ts=25 ?? i f =20ma ?@ ts=25 ?? 80?? 70?? 60?? 50?? 40?? 30?? 20?? 10?? -80?? -70?? -60?? -50?? -20?? -30?? -40?? -10?? 0?? 0.0 0.2 0.4 0.6 0.8 1.0 80?? 70?? 60?? 50?? 40?? 30?? 20?? 10?? -80?? -70?? -60?? -50?? -20?? -30?? -40?? -10?? 0?? ref.ce-p2013 05/12
7/13 6. reliability ( 1 ) details of the tests ( 2 ) judgment criteria of failure for reliability test ta=25c symbol v f i r ?v u defines the upper limit of the specified ch aracteristics. s defines the initial value. s y mbol name CLL801-0101A7-50CM1A2 < s0.7 ?@ ta=-40c 30minutes ?` 100c 30minuets, 100cycle i f =30m a measuring condition judgment criteria for failure v f =5 v citiled i f =30m a luminous flux > ?@ u2 moisture-proof test measuring item forward voltage ?@ ta=60c, 90%rh, 1000 hours ?@ ta=100c, 1000 hours reverse current citizen electronics co.,ltd. japan ?@ ta=-40c , 1000 hours ?@ ta=25c, i f =30ma , 1000 hours(with al-fin) data sheet > u1.2 low temperature storage test test condition thermal shock test high temperature storage test test item continuous operation test ref.ce-p2013 05/12
8/13 7. ta p in g s p ecifications ( in accordance with jis standard ) (1) shape and dimensions of reel (unit: mm) (2) dimensions of tape (unit: mm) (3) configuration of tape (4) quantity: 2500pcs/reel s y mbol citiled name data sheet CLL801-0101A7-50CM1A2 citizen electronics co.,ltd. japan (end) (start) unloaded tape mounted with citiled more than 40mm leading part more than 400mm ref.ce-p2013 05/12
9/13 8. packing specifications 8-1. moisture-proof packin g to prevent moisture absorption during transportation and storage, reels are packed in aluminum envelopes which contain a desiccant with a humidity indicator. 8-2. storage to prevent moisture absorption, it is strongly recommended that reels ( in bulk or taped ) should be stored in the dry box ( or the desiccator ) with a desiccant as the appropriate storage place. if not, the following is recommended. temperature : 5~30c humidity : 60%rh max. the devices should be mounted as soon as possible after unpacking. if you store the unpacked reels, please store them in the dr y box or seal them into the envelop again. s y mbol data sheet name CLL801-0101A7-50CM1A2 citiled citizen electronics co.,ltd. japan aluminum envelop desiccant label reel polyester zip fastener ref.ce-p2013 05/12
10/13 9. precautions 9-1. soldering ?@ 1 ) following soldering paste is recommended melting temperature : 216 ~ 220c. composition : sn 3.5ag 0.75cu ?@ 2 ) the temperature profile at the top surface of the parts is recommended as shown below. ?@ 3 ) it is requested that products should be handled after their temperature has dropped down to the normal room temperature 9-2. washin g ( 1 ) when washing after soldering is need ed, following conditions are requested. ?@ a ) washing solvent: pure water ?@ b ) temperature, time: 50c or less 30 seconds max. s y mbol citiled name CLL801-0101A7-50CM1A2 citizen electronics co.,ltd. japan data sheet (1) lead free solderin g 140sec 160 ~ 180 c 4 c /sec. max temperature time 4 c /sec. max 260 c max 220 c 60 ~ 70sec 3 sec .max ref.ce-p2013 05/12
11/13 9-3. eye safety - the international electrical commission (iec) published in 2006 iec 62471 ?2006 photobiological safety oflamps and lamp system s ? which includes leds within its scope. when sorting single leds according to iec 62471, most leds can be classified as belonging to either exempt group or risk group 1. - optical characteristics of leds such as radiant flux, spectrum and light distribution are factors that affect the risk group determination of the led, and especially a high-power led, that emits light containing blue wavelengths, may have properties eq uivalent to those of risk group 2. - great care should be taken when directly vi ewing an led that is driven at high current, has multiple uses as a module or when fo cusing the light with optical instruments, as these actions may greatly in crease the hazard to your eyes. - in addition, led sources that were included within the scope of iec 60825-1 / edition 1.2 ?laser safety standard?, pu blished 2001 were removed from the scope o f the iec 60825-1 / edition 2.0 revised 2007. - however, keep in mind th at some countries and regions have adopted standards based on the iec laser safety standard iec 60825-1:2001 which includes leds within its scope. 9-4. other directions ( 1 ) it is requested to avoid any stress added to the resin portion while it is heated. ( 2 ) it is requested to avoid any friction by sharp metal nail etc. to the resin portion. (3) if the p roduct mi g ht to be used under the followin g conditions , the customer must evaluate its a pp ro p riateness them. this p roduct is not desi g ned for use under the followin g conditions. in p laces where the p roduct mi g ht: - g et wet due to rain - suffer from dama g e caused b y salt. - be ex p osed to corrosive g as such as cl , h2s , nh3 , so2 , nox and so on. - be exposed to dust, fluid or oil. s y mbol citiled name CLL801-0101A7-50CM1A2 citizen electronics co.,ltd. japan data sheet ref.ce-p2013 05/12
12/13 10. designing precautions 1. the current limiting resistor should be placed in the circuit so that is driven within its rating. also avoid reverse voltage ( over-current ) applied instantaneously when on or off. 2. when pulse driving current is applied, aver age current consumption should be within the rating. also avoid reverse voltage applied when put off. 3. recommended soldering pattern unit : mm mountability and solderability need to be optimized with actual conditions such as amount of solder, reflow temperature applied in the process. 4. when assembling the circuit board into the fi nished products, care must be taken to avoid the component parts from touching other parts. 5. when using multiple leds, it is required to connect a current limiting resistor on each path which the current flows to the leds. 6. other this product complies with rohs directives. ?@?@ s y mbol citizen electronics co.,ltd. japan CLL801-0101A7-50CM1A2 data sheet < for reflow soldering > ?@?@ (ex-1) ?@?@ ?@ ?@ (ex-2) ?@ ?@?@ ?@?@ (ex-3) citiled name r rr rr rr ref.ce-p2013 05/12
13/13 11. precautions with regard to product use 1. this document is provided for reference purposes only so that citizen electronics' products are used as intended. citi zen electronics neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to an y intellectual property rights or any any other rights of citizen electronics or any th ird party with respect to the information in this document. 2. all information included in this docume nt such as product data, diagrams, charts, is current as of the date this document is issued. such information, however, is subjec t to change without any prior notice. before purchasing or using any citizen elect ronics' products listed in this document, please confirm the latest product informat ion with a citizen electronics' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production. 3. citizen electronics has used reason able care in compiling the information included in this document, but citizen electronics assumes no liabilit y whatsoever for any damages incurred as a result of errors or omissions in th e information included in this document. 4. absent ?? written signed agreement, except as provid ed in the relevant terms and conditions o f sale for product, and to the maximum ex tent allowable by law, citizen electronics assumes no liability whatsoever, including withou t limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and discla ims any and all express or implied warranties and conditions related to sale, use of pr oduct, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accu racy of information, or no infringement. 5. though citizen electronics works continually to improve products' quality and reliability, products can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safe guards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property , including data loss or corruption. in addition, customers are also responsi ble for determining the appropriateness o f use of any information contained in this docu ment such as application cases not only with evaluating by their own but also by the entire system. citizen electronics assumes no liability for customers' product design or applications. 6. please contact citizen electronics' sales office if you have any questions regardin g the information contained in this docume nt, or if you have any other inquiries. s y mbol citiled name CLL801-0101A7-50CM1A2 citizen electronics co.,ltd. japan data sheet ref.ce-p2013 05/12

▲Up To Search▲

Price & Availability of CLL801-0101A7-50CM1A2

	To Download CLL801-0101A7-50CM1A2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .